The Makita DLX2549TJ LXT 2 Piece Combo Kit contains the following:
1 x 18V DHP492 LXT Combi Drill for screwdriving and drilling. The main feature and benefits are: Redesigned speed change mechanism to avoid gear disengagement, Controller protection has been revised to enhance the protection for electronic components during variable speed control by the trigger.
Drill Chuck Capacity: 1.5-13mm
Driving Shank: 1/2in-20UNF in
No Load Speed: 0-550/2,100/min.
Impact Rate: 0-8,250/31,500/bpm
Max. Fastening Torque Hard/Soft: 130/65Nm
Max. Torque: 141Nm
Torque Settings: 21
Max. Drilling Diameter: Masonry 16mm, Steel 3mm, Wood (Auger Bit) 50mm, Wood (Self-feed bit) 76mm, Flat Bit 40mm, Hole Saw 152mm
Weight: 1.7kg without battery
1 x 18V DTD173 LXT Impact Driver has a powerful brushless motor, delivers longer runtimes, less maintenance and better power control. Its 4 stage impact selection covers a wide selection of jobs. Fitted with an ergonomically designed handle and LED job light with three brightness settings for improved visibility.
No Load Speed: 0-1,100/2,100/3,200/3,600/min.
Impact Rate: 0-1,100/2,600/3,600/3,800/bpm
Max. Torque: 20/50/170/180Nm
Standard Bolt: M5-M16, High Tensile Bolt: M5-M14
Weight: 0.85kg (without battery)
Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x 18V DC18RC Compact Charger and 1 x Type 3 MAKPAC Connector Case.