DeWalt DCK264P2 18v XR 1st Fix Nailer & 2nd Fix Nailer Kit with 2 x 5.0Ah

€1269.00

Product Code: TBT0664Category:
To Order: Contact Sales 051 845200

The DCK264P2 is the best selling Nailer kit from Dewalt. It has everything you need to get nailing, the DCN692 1st Fix Nailer and DCN660 2nd Fix Nailer cover all bases. The kit is loaded up with 2 x 5.0Ah XR Batteries, a fast charger and Deep Stak box. This is one not to be missed and highly recommended by the Toolden Staff!

18V DCN660 Cordless XR Brushless Second Fix Nailer:
The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster.The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Increased visibility and durability along with protection for work-surface from the non-mar contact-trip and depths can be easily adjusted using the thumb wheel depth adjuster. Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud. The user can engage the contact trip lock-off and prevent accidental dis-charge of fastener and dry fire lockout ensures that the tool is protected from firing without nails in the magazine.Mechanical rather than gas operation offers consistent performance at temperature between -20 to 50°C and minimal cleaning/service requirements.Its cordless design allows you to work without the inconvenience and safety risk of trailing leads. Gas free operation offers a significant saving in running costs.

18V DCN692 Cordless XR Framing Nailer:
With brushless motor technology for excellent power and tool-free jam clearance to minimise down time. Suitable for many applications, including stud wall insulation, roofing, floor board and cladding installation etc.

1 x Multi-Voltage DCB115 XR Universal Charger:
Varies the charge rate according to battery type to increase battery pack life.It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold.Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.

In The Box:
1 x DCN660 2nd Fix Nailer Nail Gun
1 x DCN692 1st Fix Framing Nailer
2 x 18v 5.0ah Li-ion Batteries
1 x Battery Charger
1 x DS400

Technical Specification:
Voltage – 18 V
Nail Diameter – 1.6 (16Ga) mm
Magazine angle – 20 °
Magazine loading – Rear
Nail Length – 32 – 63 mm
Magazine capacity – 110 Nails
Length – 270 mm
Width – 95 mm
Height – 325 mm
Weight – 2.35 kg
Nailer Operating Mode – Bump and Sequential
Integrated Belt Hook – Yes
Jam Clearing – Tool free
Temperature Range – -20 to 50°C
Fault indicator – Yes
Noise LPa 1sd / Uncertainty – 81 / 3 dB
Noise LWa 1sd / Uncertainty – 92 / 3 dB
Vibration / Uncertainty – <2.5 / 1.5 m/s

Technical Specifications:
Nail Diameter: 2.8 – 3.3 mm
Magazine angle: 30 – 34°
Magazine loading: Rear – load
Nail Length: 50 – 90 mm
Magazine capacity: Up to 55 Nails
Firing mode: Bump & Sequential
Nailer Operating Mode: Selective
Integrated Belt Hook: Yes
Jam Clearing: Yes
Impact energy: 105 J
Temperature Range: -20 to 50°C
Fault indicator: Yes

Reviews

There are no reviews yet.

Be the first to review “DeWalt DCK264P2 18v XR 1st Fix Nailer & 2nd Fix Nailer Kit with 2 x 5.0Ah”

Your email address will not be published. Required fields are marked *